There are a lot of anti-snoring mouthpieces on the market, so choosing one that is right for you can be a little overwhelming. If you are newly being introduced to these products you might be surprised at how different many are from others.

Ripsnore is one you may have been intrigued by because the company claims a 98 percent effectiveness rate. So, you are probably wondering if this is the right device for you, and if it is really this effective.

Getting Acquainted with Ripsnore

Ripsnore is classified as a mandibular advancement device (MAD), so it works by holding your lower jaw in a forward position. By doing this your airway remains free of obstruction and soft tissues are not permitted to vibrate. This design has been used for a long time with great success, but this does not mean all mouthpieces succeed at accomplishing the overall goal.

The first thing you notice about this transparent device is that it has two front air holes. This makes the product suitable for anyone who typically breathes through their mouth while sleeping.

The oral appliance is crafted from Dynaflex, which is a BPA-free, FDA-cleared, medical grade material. Understand that the material is FDA-cleared, but this does not mean that the product is, as well.

Like most MADs, this device is available in one size. To achieve a custom fit, you must mold it to your mouth doing the boil-and-bite technique. Do not let the process make you nervous; it is considerably easier than you might think.

Achieving a Custom Fit

Molding the device will only take a few minutes. All you need is a pot, two small bowls, a stopwatch or timer on your phone, and tongs or a slotted spoon.

  • Bring a small pot of water to a boil. While you are doing this add ice water to one of the empty bowls.
  • When the water is boiling pour it into the other empty bowl.
  • Using the tongs or spoon, submerge the appliance in the hot water for 30 seconds. This will soften the material.
  • Insert the device in your mouth with the curved side facing upward.
  • When you bite down make sure your lower jaw is in a forward position.
  • Push against the device with your tongue from the inside and press against your cheeks to help form the mold on the outer jaw line.
  • After about 30 seconds, remove and place in the ice water to speed up the hardening process.
  • Once cool, place the device in your mouth and check the fit. If needed, the product can be trimmed, but make sure you are certain it needs trimming before doing this.

The Company Behind the Product

about-companyDavid Campbell designed this anti-snoring device. Although he has several family members in the dental industry that total 80 years’ experience combined, Campbell decided to go a different route. He was an Australian engineer with a snoring problem. So, he was anxious to design a product that would work.

Campbell founded his company in 2009, and is the company’s current Director over a small staff of about 10 members. The product can be purchased in pharmacies in Australia and New Zealand, but there are representatives and suppliers in the United States, Canada, and Britain.

My Personal Experience

test-labI fitted the device as soon as it arrived, so it would be ready for me at bedtime. As soon as I put it in my mouth I started drooling. This is actually quite common because your mouth has to get used to a foreign object being there.

I went to sleep while my wife stayed up a little while to read. In the morning she said I did not make a sound all night, so it did stop my snoring. My jaw was quite sore though.

By the third day, the soreness in my jaw was almost gone, and I wasn’t waking up in a pile of drool. My mouth was starting to get used to it. For the full seven-day trial period my wife said I never snored once, so it is effective.

Although I found it to be comfortable, I have worn others with a more streamlined design that was less noticeable when in place. The material is definitely thicker than what is found on some other devices. If this were to be improved upon it would be significantly more comfortable. I did appreciate the breathing holes and divider in front.

Let’s Talk Price

priceYou can get two of these appliances for $67. This is only $33.50 per unit and shipping is free. It also comes with a 45-day money back guarantee, which is 15 days longer than most mouthpieces.

Pros and Cons

I had a positive experience with this device, but that does not mean that it is not without faults. There is no such thing as a perfect mouthpiece, so it is important that you know the positive and negative qualities before making your decision.

Positives:

  • Holds the lower jaw forward to keep the airway free of obstruction.
  • Front air holes and spacer ensure that your mouth remains slightly open so the air can flow through while you are sleeping.
  • Able to get a custom fit right at home using the boil-and-bite technique.
  • Material is FDA-cleared and BPA-free.
  • Comes with a 45-day money back guarantee.
  • Significantly less expensive than many other options.

Negatives:

  • Although the material is FDA-cleared, the device itself is not.
  • Complaints have been made with the Better Business Bureau.
  • Thicker material makes the device bulky and less comfortable than some other devices.
  • Lifespan can range 3 to 18 months. If it only lasts three months you will be replacing it far more often than you might with other products.
  • Jaw soreness and drooling are to be expected.

My Final Thoughts

conclusionAlthough the device is made soft plastic material it could be a lot more comfortable, if it was streamlined. I have tried a lot of devices and this one is definitely more bulky than many others. I do like the air holes and spacer in front that allow you to breathe freely, and the boil-and-bite technique does help you achieve a snug fit.

The price of $67 for two is considerably less expensive than many mouthpieces, but if it lasts only three months, then it is not that good of a value. If you are looking for a budget-friendly oral appliance that does stop snoring, I recommend trying Ripsnore.

However, I have found other inexpensive products to be just as effective, but a lot more comfortable. ZQuiet is one that stands out in my mind. Unlike most MADs that hold your jaw in a stationary position, ZQuiet lets you move it to talk and sip liquids, thanks to its Living Hinge Technology™.

It is made of a BPA-free and latex-free material that is soft on your gums, and the device is cleared by the FDA. Due to its low-profile design, it takes up barely any space in your mouth, making it much more comfortable than many other devices.

Click Here to Access the Official Ripsnore Website

Which device should I choose?

No one can answer this question for you. Your mouth and needs are unique, so one that I love or that your neighbor swears by may not be the best solution for you.

There are numerous products available to choose from, so if you are feeling overwhelmed this is perfectly normal. I have written several reviews on products I have personally tried and you can always use the chart I compiled for comparison purposes.